- Author:
- WeiweiAi <wai484@aucklanduni.ac.nz>
- Date:
- 2021-04-27 14:28:37+12:00
- Desc:
- Change .xml to cellml;
Add temperature_factor.cellml and corresponding modification to include tempeature in the model;
Add clamped_current.cellml, voltage_clamp_protocol.cellml and voltage_clamp_experiment.cellml to simulate membrance current during voltage clamp ( there is an issue at -10 mV but works fine at other voltage conditions);
Add propagated_AP.cellml and AP_propagation_experiment.cellml to simulate propagated action potential (issue: the AP doesn't fall);
Add data derived from the figures in the original paper using Engauge Digitizer;
- Permanent Source URI:
- https://models.cellml.org/workspace/64f/rawfile/01b5e3d2e6dd9987f71682214516c78e4dd76916/sed-ml/Fig11_d.csv
x,Curve1
-3.7801,12.79
-3.2241,10.36
-2.6899,10.09
-2.1562,7.68
-1.5997,7.39
-1.0433,7.11
-0.5314,6.85
0.0028,6.57
0.2967,27.85
0.4857,79.18
0.6079,130.54
0.7523,181.9
0.875,235.4
1.0194,286.75
1.2084,338.08
1.5291,380.77
2.0405,378.37
2.4108,339.61
2.7128,294.46
3.0376,251.44
3.3628,210.56
3.7103,169.67
4.0805,130.91
4.4512,94.3
4.8668,59.8
5.2824,25.31
5.743,-7.07
6.1827,-33
6.6897,-56.83
7.1971,-78.52
7.7049,-98.06
8.2132,-115.46
8.7437,-132.88
9.2529,-145.99
9.7849,-156.98
10.3168,-167.96
10.8718,-174.67
11.4042,-183.52
11.937,-190.22
12.4926,-194.79
13.0258,-199.34
13.5814,-203.91
14.1147,-208.47
14.6711,-208.75
15.2044,-213.31
15.7599,-217.88
16.3159,-220.31
16.8496,-222.72
17.4061,-223.01
17.9393,-227.56
18.4958,-227.85
19.0522,-228.13
19.586,-230.55
20.1419,-232.97
20.6539,-233.23
21.2099,-235.66
21.744,-235.93
22.3,-238.36
22.8347,-236.49
