- Author:
- WeiweiAi <wai484@aucklanduni.ac.nz>
- Date:
- 2021-04-27 14:28:37+12:00
- Desc:
- Change .xml to cellml;
Add temperature_factor.cellml and corresponding modification to include tempeature in the model;
Add clamped_current.cellml, voltage_clamp_protocol.cellml and voltage_clamp_experiment.cellml to simulate membrance current during voltage clamp ( there is an issue at -10 mV but works fine at other voltage conditions);
Add propagated_AP.cellml and AP_propagation_experiment.cellml to simulate propagated action potential (issue: the AP doesn't fall);
Add data derived from the figures in the original paper using Engauge Digitizer;
- Permanent Source URI:
- https://models.cellml.org/workspace/64f/rawfile/01b5e3d2e6dd9987f71682214516c78e4dd76916/sed-ml/fig14.csv
x,Curve1
0,15
0.01066,11.883
0.04973,15.265
0.14565,17.496
0.18117,19.464
0.21314,21.717
0.26643,27.642
0.2984,34.706
0.32327,41.206
0.35879,54.779
0.36945,62.983
0.38721,68.92
0.39432,76.276
0.40853,83.063
0.41918,90.701
0.44405,96.635
0.47957,102.566
0.53641,97.735
0.56838,90.931
0.60036,84.693
0.6714,71.649
0.73535,58.608
0.76732,51.238
0.80639,45.564
0.84192,38.476
0.88455,32.517
0.9627,20.037
1.00178,13.231
1.04796,7.554
1.08348,1.315
1.12611,-3.229
1.19716,-8.065
1.27531,-10.074
1.38544,-11.811
1.45293,-11.835
1.63055,-11.898
1.71936,-12.212
1.80817,-11.96
1.98579,-12.023
2.15631,-10.952
2.33393,-10.448
2.50444,-9.943
2.68206,-9.439
2.85258,-8.934
3.0373,-7.867
3.21492,-7.93
3.39254,-6.861
3.56306,-6.921
3.73357,-6.415
3.91119,-5.346
4.08171,-5.123
